User Command Specifications
9．Details of command GET CONT
GET CONT
GET CONT
GET□CONT
?△CONT
:CONT=<Contrast value: Number>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The contrast can be set by the CONT command.
> GET CONT or ? CONT
< g:CONT=3
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
○○×
SX60 X600
○○○
○○
X600
○
SX6
○○○
SX60
○○
– ○○×
SX50
○○○ –
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power
Input Mode
Remote Local
○○○○
01.00** 01.01** 01.01** 01.01**
SX6
Commands
Function
Format
Description
Response
This inquires about the current contrast value setting.
Example
Contrast value setting inquir
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Command
supported
Number
SX50
Mode Control Setting Reference
PAGE 85
