User Command Specifications
9．Details of command RANGE LANG
RANGE LANG
RANGE LANG
RANGE□LANG
r:LANG=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE LANG
<
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Commands
Function
Format
Language setting option reques
Control
Setting Reference
Example
Description
Response
This inquires about the parameter options which enable the language to be set.
ID
SX50 SX6 SX60 X600
r:LANG=I,ENG,FRA,GER,ITA,SPA,POR,SWE,DUT,RUS,CHS,CHT,KOR,JPN,FIN,NOR,TUR,
POL,HUN,CZE,DAN
Mode
01.00** 01.01** 01.01** 01.01**
○○
Model Power
Input
D-RGB A-RGB1 A-RGB2 Comp Video
Mode
Remote Local
Remarks
S-Video D-Video SCART None
SX50
○○○○○○––○○×
SX6
○○○○○○○○○○×
SX60
X600
Command
supported
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The language can be set by the LANG command.
○○
PAGE 166
