57
Using Headphones or an External
Microphone
Using Headphones
Use headphones for playback or to
check the audio level while recording.
The headphones are connected to the
AV OUT/ terminal, which is used for
both the headphones and the audio/
video output. Before connecting the
headphones, follow the procedure
below to change the function of the
terminal from AV output to
(headphones) output.
FUNC.
( 28)
[ MENU]
[ SYSTEM SETUP]
[AV/PHONES] [PHONES]
appears.
In mode, adjust the volume of the
headphones with the [PHONES VOL.]
setting ( 97). In mode, adjust
the headphones volume the same way
you adjust the speaker’s volume
( 41).
IMPORTANT
• When using headphones, make sure
to lower the volume to an appropriate
level.
• Do not connect the headphones to
the AV OUT/ terminal if the icon
does not appear on the screen. If you
connect the headphones while the
terminal is set to AV output, only
noise will be output.
NOTES
• Use commercially available headphones
with a ∅ 3.5 mm minijack.
• When you turn off the camcorder or
change the operating mode, the
[AV/PHONES] setting in mode will
return to [ AV].
( 26)
FUNC.
FUNC.
TO ADJUST THE VOLUME OF THE
HEADPHONES
D128S_NTSC_E.book Page 57 Thursday, June 5, 2008 4:01 PM
