71
[ MENU]
[ SYSTEM SETUP]
[IMG QUALITY]
Desired image quality*
* The number displayed at the bottom
indicates the approximate number of
images that can be recorded with the
current quality setting.
1 Play back the scene containing
the picture you want to capture.
2 Pause the playback at the point
you want to capture.
3Press fully.
NOTES
• The data code of the still image will
reflect the date and time of recording of
the original scene.
• A still image captured from a scene with
lots of fast movement may be blurred.
• The still image will be recorded to the
memory selected for recording still
images ( 33).
Protecting Photos
You can protect still images from
accidental erasure.
FUNC.
( 28)
1 Open the image selection screen.
[ PROTECT]
[ PROTECT] appears on the
screen.
2 Select ( ) the still image you
want to protect.
3 Press to protect the still
image.
appears on the bottom bar and
the image cannot be erased. Press
again to cancel the image
protection.
4 Repeat steps 2-3 to protect
additional images or press
twice to close the menu.
IMPORTANT
Initializing the memory ( 33) will
permanently erase all recordings,
including protected still images.
Copying Photos
You can copy still images from the built-
in memory to the memory card and vice
versa.
POINTS TO CHECK
Select in advance the memory from which
you want to copy the still images ( 65).
FUNC.
( 28)
TO CAPTURE THE STILL IMAGE
( 26)
FUNC.
FUNC.
PHOTO
( 26)
FUNC.
FUNC.
D128S_NTSC_E.book Page 71 Thursday, June 5, 2008 4:01 PM
