85
4 Press the start button on the DVD
burner.
• A progress bar will be displayed on
the screen.
• After pressing the start button
(while the current disc is being
written) the operation cannot be
canceled.
• When the last disc is finalized,
[TASK COMPLETED] will be
displayed. Take out the disc and
close the disc tray.
After a disc is finalized it will be ejected
automatically and [INSERT A NEW/
BLANK DISC AND CLOSE THE DISC
TRAY] will appear. Insert the next disc
and close the disc tray.
After the operation is finished, [INSERT
A NEW/BLANK DISC] will be displayed
again. Insert a brand new disc and
close the disc tray.
IMPORTANT
• Discs created with the optional DW-100
DVD Burner that contain recordings in
MXP mode (24 Mbps) cannot be played
back on AVCHD-compatible DVD
players or Blu-ray Disc players (as of
June 2008). Use the DW-100 to play
back such discs ( 86). Do not insert
such discs into a device that is not
compatible with MXP mode as you may
not be able to eject the disc.
• Discs with recordings in FXP/XP+/SP/
LP mode created using the optional
DW-100 DVD Burner can be played
back only with AVCHD-compatible DVD
players. Do not insert a high-definition
disc into a DVD player that is not
compatible with AVCHD specifications
as you may not be able to eject the disc.
• While the camcorder is connected to the
DVD burner, do not open the memory
card slot cover and do not remove the
memory card.
• Observe the following precautions while
the ACCESS indicator on the camcorder
is on or flashing. Failing to do so may
result in permanent data loss.
- Do not open the memory card slot
cover.
- Do not disconnect the USB cable.
- Do not disconnect the power source
or turn off the camcorder or the DVD
burner.
NOTES
If a scene does not fit on a disc, a portion
will be saved on the disc and the
remaining portion will be saved on the
next disc.
WHEN THE DATA REQUIRES MULTIPLE DISCS
TO CREATE AN ADDITIONAL COPY OF THE
SAME DISC
D128S_NTSC_E.book Page 85 Thursday, June 5, 2008 4:01 PM
