Reviewing a Recording
114
Reviewing a Recording
When the camcorder is in mode, you can review the last clip that
was recorded.
1 Open the [Review Recording] submenu to set the review length.
[w Other Functions] > [Review Recording]
2 Select the desired option and then press SET.
3 After you finish recording, press the
u button.
• The last clip that was recorded is played back without
audio for the selected duration. [Ð REVIEW] appears at
the top of the screen.
• Press the CANCEL button to stop reviewing the clip and
change the camcorder back to record pause mode.
• After the clip finishes playing back, the camcorder returns
to record pause mode.
Options
[Entire Clip]: Allows you to review the entire clip.
[Last 4 sec]: Allows you to review just the last 4 seconds of the
clip.
NOTES
• Clips cannot be reviewed when using a special recording mode (A 116) or when the movie format is set to
MXF+MP4 (A 55).
• If the camcorder switched CF cards during the recording of an MXF clip, the camcorder will play back the clip
on the CF card most recently recorded on.
Operating modes:
[w Other Functions]
[
Review Recording]
[Entire Clip]
C OPY
