Preparing the Power Supply
24
• If there is a malfunction with the compact power adapter or battery pack, the charge indicator will go out and
charging will stop.
• For handling precautions regarding the battery pack, refer to
Battery Pack
(A 226).
• Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day
before, to ensure a full charge.
• Repeatedly charging and discharging the battery pack will eventually shorten its battery life. You can check the
battery life on the [Battery/Hour Meter] status screen (A 211). Fully charging the battery pack and then
discharging it will give you a more accurate reading.
• We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.
Attaching the Battery Pack
1Set the Q switch to OFF.
2 Insert the battery pack all the way into the compartment and
press gently down until it clicks.
Removing the Battery Pack
1Set the Q switch to OFF.
2 Slide the BATTERY RELEASE lever in the direction of the arrow.
While holding it pressed down, slide the battery pack up and
remove it from the battery compartment.
ቢ
ባ
ቢ
ባ
C OPY
