E-52
703A-E-054A
Recording Multiple Tracks
Track 1 of the keyboard’s song memory records Auto Accom-
paniment and keyboard play. In addition, there are five oth-
er melody tracks that you can use to record melody parts
only. You can record different tones to the melody tracks and
build a full ensemble of instruments for your recordings. The
procedure you use for recording to Tracks 2 through 6 is iden-
tical to the one you use when recording to Track 1.
To record to Tracks 2 through 6 using real-
time recording
You can record to Tracks 2 through 6 while playing back what
you originally recorded on Track 1 and any other tracks that
are already recorded.
1. Press the SONG MEMORY button twice to enter
record standby, and then use the [+] and [–] but-
tons to select a song number (0/1).
• The song number you select should be the one where
you previously input Track 1.
2. Use the SONG MEMORY TRACK buttons to se-
lect the track you want to record to (2 through
6).
• While the keyboard is in record standby, the display
shows the level meters for channels 11 through 16, so
you can check which tracks have already been record-
ed. See “Level Meter Contents During Record/Edit
Standby” on page E-53 for details.
3. Make the following settings.
• Tone number
• Tempo (to set playback of the recorded tracks to a tem-
po that is easy for you to follow)
4. Press the START/STOP button to start recording.
• At this time, the contents of any tracks that are al-
ready recorded start to play back.
• Optional pedal operation you perform is also record-
ed.
5. Use the keyboard to play what you want to
record the track you selected.
6. Press the START/STOP button to end recording
when you are finished.
Track Contents After Real-time Recording
In addition to keyboard notes, the following data is also re-
corded to the selected track during real-time recording. This
data is applied whenever the track is played back.
• Tone number
• Optional pedal operations
❚
NOTE
• Starting a record operation also records the Mixer settings for
the other tracks to the song header.
To record to Tracks 2 through 6 using step
recording
This procedure describes how to input notes one-by-one,
specifying each note’s pitch and length.
1. Press the SONG MEMORY button three times to
enter real-time record standby, and then use the
[+] and [–] buttons to select a song number (0/
1).
• The song number you select should be the one where
you previously input Track 1.
Number buttons
[+]/[–]
START/STOP
SONG MEMORY TRACK
SONG MEMORY
S t e
p
R e c
