Multimedia Presentation System 250 Crestron MPS-250
Connectors, Controls, & Indicators (Continued)
# CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
33
100 – 240V ~2.5A
50/60 Hz
(POWER SUPPLY)
(1) IEC Socket, mates with removable power
cord (included).
1. Interface connectors for NET, INFRARED-SERIAL, IR IN, INPUT, RELAY OUTPUT, and
AUDIO ports are provided with the unit.
2. Transmission levels on the infrared – serial output connectors are in the 0 to +5 VDC range, which
may not be compatible with all RS-232 devices.
3. This eight-pin RJ-45 port provides connectivity to a touchpanel with a CH input port or a Crestron
device with a CAT5 video input. This port provides component, composite or S-video balanced
output over CAT5 wiring. Refer to the following table for connector pinouts.
RJ-45 PIN
NUMBER
WIRE COLORS (568B) COMPOSITE S-VIDEO COMPONENT
1 WHITE/ORANGE + Composite + Luminance + Y
2 ORANGE - Composite - Luminance - Y
3 WHITE/GREEN N/A + Chrominance + P
b
4 BLUE N/A N/A + P
r
5 WHITE/BLUE N/A N/A - P
r
6 GREEN N/A - Chrominance - P
b
7 WHITE/BROWN N/A N/A N/A
8 BROWN N/A N/A N/A
4. The eight-pin RJ-45 QuickMedia transport port accepts CAT5E/CAT6 carrying RGB, audio, video
and microphone signals. The QM port conforms to the 568B wiring standard. Refer to the following
table for connector pinouts.
RJ-45 PIN
NUMBER
WIRE COLORS
(EIA 568B)
QM
ASSIGNMENT
RGB
QM ASSIGNMENT
COMPOSITE, S-VIDEO,
COMPONENT AND AUDIO
1 WHITE/ORANGE - RGB Red - CHROMINANCE (- P
r
)
2 ORANGE + RGB Red + CHROMINANCE (+ P
r
)
3 WHITE/GREEN - RGB Green - LUMINANCE (- Y)
4 BLUE + Digital Audio + AUDIO
5 WHITE/BLUE - Digital Audio - AUDIO
6 GREEN + RGB Green + LUMINANCE (+ Y)
7 WHITE/BROWN - RGB Blue - COMPOSITE (- P
b
)
8 BROWN + RGB Blue + COMPOSITE (+ P
b
)
20 • Multimedia Presentation System 250: MPS-250 Operations Guide – DOC. 6647A
