c3
Enter Scanner SCSI ID
3
Enter MS-DOS Path
D
Enter Windows Path
0
Enter ASPI Path.
Follow these steps to install Epson TWAIN for Adaptec SCSI
adapter support:
1.
From the welcome screen, select Continue. The Installation
Options screen appears.
2.
Select your preferred option:
Make changes to CONFIG.SYS
Write changes to file - CONFIG.ADD
If you select the first option, Setup copies your existing
CONFIG.SYS file to CONFIG.BAK before it modifies the
file.
If you select the second option, Setup copies changes to a file
called CONFIG.ADD. You can refer to this file later to
modify your CONFIG.SYS file.
3.
Select Continue. You see the Interface Options screen.
4.
Select the SCSI support option:
ASPI Manager SCSI Support
5.
Select
Continue. You
see
the SCSI
Interface
Options screen.
Epson SCSI Support Software
Use Existing SCSI Support Software
If you are installing your first Adaptec SCSI adapter, select the
first option.
2-6
Installing Epson TWAIN
