A SERVICE OF

logo

Open as PDF
next previous
Select Target Device from the Edit pull down menu. You see
the Target Device screen:
larget
Device
p&Y
Target
Device
Setting
Name
1
taraet
device
3
Gamma
Correction
Analog
Monitor
Cglor
Correction
CRT
D
isplay
Resolution
72
DPI
To Add a Target Device
Rather than modifying the Epson-supplied target devices, you
will probably want to create your own definitions. Follow these
steps to add a target device:
1.
Select a predefined target device similar to the device you
want to define.
2.
Type the name you want to assign to your target device over
the name displayed in the Target Device Setting Name
dialog box.
3. Select the values you want to assign to the target device,
using the information in the following table. These options
are described in more detail in your scanner manual.
Using TWAIN
3-15