A SERVICE OF

logo

BT100-EU-EN V3.0 8/13
13
Data Acquisition Mode
In the data acquisition mode, the meter is connected to the computer while taking readings. At the
same time the readings are taken, they are displayed and stored on the computer. The readings can
be displayed as a List, a Voltage graph or a Resistance graph.
Sampling Rate Setting for Data Acquisition Mode
The sampling rate for the data acquisition mode can
be set from 1 reading per second to 1 reading every
86,400 seconds (1 sample every 24 hours).
Note: This sampling rate setting is for the data
acquisition mode only. For datalogger mode, the
sample rate is set using the meter’s front panel
controls as explained in the hardware User Guide
supplied with the meter.