Switch Memory and Configuration
Multiple Configuration Files
ProCurve(config)# reload after 04:14:00
Reload scheduled in 4 days, 14 hours, 0 minutes
This command will cause a switchover at the scheduled time to the
other management module which may not be running the same software
image and configurations. Do you want to continue [y/n]?
Figure 6-18. An Example of the reload Command with a Redundant Management System
Multiple Configuration Files
Action Page
Listing and Displaying Startup-Config Files 6-30
Changing or Overriding the Reboot Configuration Policy 6-31
Managing Startup-Config Files
Renaming Startup-Config Files 6-34
Copying Startup-Config Files 6-34
Erasing Startup-Config Files 6-35
Effect of Using the Clear + Reset Buttons 6-37
Copying Startup-Config Files to or from a Remote Server 6-38
This method of operation means that you cannot preserve different startup-
config files across a reboot without using remote storage.
The switch allows up to three startup-config files with options for selecting
which startup-config file to use for:
■ A fixed reboot policy using a specific startup-config file for a specific boot
path (primary or secondary flash)
■ Overriding the current reboot policy on a per-instance basis
Boot Command
Secondary Boot Path
Primary Boot Path
Startup-Config
Options:
File 1
File 2
File 3
Running-Config
Figure 6-19. Optional Reboot Process
6-26
