Time Protocols
SNTP: Viewing, Selecting, and Configuring
ProCurve(config)# show sntp
SNTP Configuration
SNTP Authentication : Enabled
Time Sync Mode: Sntp
SNTP Mode : Unicast
Poll Interval (sec) [720] : 720
Priority SNTP Server Address
-------- ---------------------------------------
1 10.10.10.2
2 fe80::200:24ff:fec8:4ca8
Protocol Version KeyId
3 55
3 55
---------------- -----
Figure 9-14. Example of SNTP Configuration Information
To display all the SNTP authentication keys that have been configured on the
switch, enter the show sntp authentication command.
ProCurve(config)# show sntp authentication
SNTP Authentication Information
SNTP Authentication : Enabled
Key-ID Auth Mode Trusted
------- ---------- -------
-
55 MD5 Yes
10 MD5 No
Figure 9-15. Example of show sntp authentication Command Output
To display the statistical information for each SNTP server, enter the sntp
statistics command. The number of SNTP packets that have failed authentica-
tion is displayed for each SNTP server address.
9-22
