A SERVICE OF

logo

Troubleshooting
Viewing Switch Configuration and Operation
Figure C-27 shows sample output from the show tech command.
ProCurve# show tech
show system
Status and Counters - General System Information
System Name
System Contact
System Location
: 5400_1
:
:
MAC Age Time (sec) : 300
Time Zone : 0
Daylight Time Rule : None
Software revision
ROM Version
: K.14.XX
: K.12.12
Base MAC Addr
Serial Number
: 001871-c42f00
: SG641SU00L
Up Time
CPU Util (%)
: 23 hours
: 10
Memory - Total
Free
:
:
IP Mgmt - Pkts Rx : 759
Pkts Tx : 2
Packet
Buffers
- Total
Free
Lowest
Missed
: 6750
: 5086
: 4961
: 0
show flash
Image
-----
Size(Bytes)
----------
Date Version
-------- -------
Build #
-------
Figure C-27. Example of Show Tech Command
To specify the data displayed by the show tech command, use the copy show
tech command as described in “Customizing show tech Command Output” on
page C-75.
Saving show tech Command Output to a Text File
When you enter the show tech command, a summary of switch operational
data is sent to your terminal emulator. You can use your terminal emulator’s
text capture features to save the show tech data to a text file for viewing,
printing, or sending to an associate to diagnose a problem.
C-73