Hewlett-Packard 700 Manual

A SERVICE OF

next previous

Enabling System Security

Enabling System Security

Enable Secure

Environment

Variable

Once you have entered and conﬁrmed your password, you must

enable security by setting the secure environment variable to on,

using the

set secure

command as Table 11–5 describes.

Table 11–5 Enabling the Secure Environment Variable

Step Description

1 Check the current status of the password security feature

by entering the

show secure

or

printenv secure

command

at the console prompt as follows:

>>> show secure

Return

SECURE = OFF

This example indicates that the password security feature

is not enabled.

2 Enable the password security feature with

set

or

setenv

command as follows:

>>> setenv secure on

Return

SECURE = ON

11–14 Using the Password Security Feature