A SERVICE OF

logo

Connecting the Server
Connecting the Server
Step 1:
Ethernet
Loopback
Connector
Connect the Ethernet loopback connector to the AUI Ethernet
port on the system unit, as shown in Figure 4–2. If you are
planning to connect to an AUI Ethernet network or a ThinWire
Ethernet network using a DECXM transceiver, you may omit this
step. After you have completed the connections in this chapter,
see Chapter 5 for information about network connections.
Figure 4–2 Connecting the Ethernet Loopback Connector
MLO-009195
ISDN
S3
2
1
0
Installing a Server System 4–5