16
if air for combustion contains certain chemical vapors. Spray can
compounds which are potentially corrosive.
GasPiping
model rating plate. The inlet gas pressure must not exceed
inlet gas pressure listed on the rating plate is for the purpose
of input adjustment. If the gas control valve is subjected to
If the main gas line shut-off serving all gas appliances is
is complete.
A gas line of sufficient size must be run to the water heater.
Consult the current edition of National Fuel Gas Code
ANSI Z223.1/NFPA 54 and your gas supplier concerning
pipe size.
help prevent dirt and foreign materials from entering the gas
control valve.
shut off valve and control valve to permit servicing of the unit.
The minimum inlet gas pressure shown on the rating plate is that
Water heaters covered in this manual have been tested and
the National Fuel Gas Code ANSI Z223.1/NFPA 54. Contact
your local gas supplier for further information.
producing carbon monoxide gas in excess of the safe limits. This
could result in serious injury or death. Contact your local gas supplier
placing the appliance in operation.