A SERVICE OF

logo

72GPS1200
Reference Station
5.3 Getting Started with the GRX1200 Series
Ways of operating The GRX1200 Series can either be operated with the RX1200 like the other
GPS1200 receivers or by remote control.
Operation Description
With RX1200 The receiver can be fully configured. In order to start and stop
a point occupation, an external application software such as
LEICA GPS Spider must send appropriate OWI or LB2
commands through a remote interface port to the receiver.
Available with full functionality
Job management
Data management
Configuration of ports
Configuration of operation parameters
Status information
Transfer capabilities including the upload of new
firmware
Unavailable