A SERVICE OF

logo

Reference Station GPS1200 77
Configure a NET
port step-by-step
In order to use a NET port for the remote interface connection, the RJ45 connector
of the GRX1200 Pro must be connected to a network hub, router or PC Ethernet port
which requires a special crossed cable. A static IP address must be available. Talk
to the network administrator in order to obtain a static network IP address. The
following step-by-step description shows how to create a NET port and assign the
remote interface to it. Refer to the GPS1200 Technical Reference Manual for more
information.
Step Description
1. Main Menu: Config...\Instrument Settings...\Set NET Parameters
2. CONFIGURE Set NET Parameters
Enter the Internet Protocol address, the network mask and the gateway.
3. CONT (F1) returns to GPS1200 Main Menu.
4. Main Menu: Config...\Interfaces...
5. CONFIGURE Interfaces
Highlight Remote.
6. EDIT (F3) to access CONFIGURE Interfaces.
7. Highlight a NET port.