11
**2 People Required For This Step**
MP
PB
PA
Completely
tighten the Cap
Nuts (PB) now.
Make sure the square portion of the Bolt
is completely inside the square hole.
Square holes
BP
PA
PB
Failure to seat the pole sections together and secure
the Carriage Bolts could cause the pole sections to
separate, resulting in severe personal injuries such as
broken bones, cuts, nerve, spinal cord or brain injury,
or death. Property damage may also occur.
WARNING
Place the Wood Block
(AE) on the Top Pole
and strike it firmly with a
hammer or mallet six or
seven times.
31
With the Backboard facing the playing
surface, line up the holes in the Middle Pole
with the slots in the Bottom Pole. Carefully lift
the system onto the Bottom Pole.
AE
PB
PA
(1)
HD9139
(1)
Required For
This Page:
7/16 Wrench
Operation of the height
adjustment system
The adjustable system may be adjusted from 7 1/2 feet
to 10 feet in 6-inch increments.
Hold the Handle tightly and squeeze the Trigger. Raise
the Handle to lower the Backboard, or lower the Handle
to raise the Backboard.
WARNING
Do not overtighten the Cap Nut. If the
end of the Bolt breaks through the
plastic cap, call our Customer Service
Department at the number on Page
One. Exposed threads on the end of the
Bolt may cause serious injuries such
as those listed on Page One.
PRODUCT DESCRIPTION MODEL #
Universal Ground Sleeve 0023
Accessories available for more basketball fun!
For price and freight information call
our Customer Service Department.
The Universal Ground Sleeve
enables the pole to be cemented
in, yet still removable. The
sleeve sits flush with the ground
after installation. Fits 3.5"
diameter poles.
Universal Ground
Sleeve #0023
To place orders, use a Master
Card or Visa and call our Cus-
tomer Service Department:
LIFETIME PRODUCTS, INC.
P.O. BOX 160010
BLDG. D-11, FREEPORT
CENTER
CLEARFIELD, UT 84016-0010
1-800-225-3865
Insert the Pole
Cap (AA) into the
top of the pole.
Hammer/Mallet
