9
Required For
This Page:
Screwdriver
AL
HB
HB
AK
AK
HJ
**2 Adults Required For
This Step**
HB
HD
HJ
(2)
(4)
(2)
3/4 Wrenches
AL
HD
HD
HH01700C
22
23
AN
AI
AI
The bottom of the Sticker (AI)
lines up with the bottom edge
of the Inner Channel (AN).
AN
24
AN
AO
AO
AO
AN
AN
Slide the Outer Tube
(AO) up to the 10 mark
and release the Trigger
so it clicks into place.
25
Insert the slotted end first.
Squeeze the Trigger while inserting the
Inner Channel into the Outer Tube.
AR
AO
Remove the Inner
Channel that is packaged
inside the Outer Tube
(AO) before attaching the
Handle (AR).
21
GB
GB
GB (2)
HH01300
The Backboard must be on the opposite side
of the pole as the Pole Bracket.
AP
AO
GH
GE
26
GE
GH
(1)
1/2 Wrenches
(1)
Tighten the Nut securely.
AR
WARNING
Do not overtighten the Cap Nut. If the end of
the Bolt breaks through the plastic cap, call our
Customer Service Department at the number
on Page One. Exposed threads on the end of
the Bolt may cause serious injuries such as
those listed on Page One.
The Backboard and Rim
should be on the ground
resting on cardboard with the
Extension Arms facing up.
