IP Setup 4-7
Small Office models only IP Setup
Ethernet IP Address: 192.168.6.137
Ethernet Subnet Mask: 255.255.255.248
Default IP Gateway: 0.0.0.0
DNS Server: 0.0.0.0
Secondary DNS Server: 0.0.0.0
Domain Name:
Exported Services...
Follow these steps to configure IP Setup for your Small Office
Netopia Router:
■ Select Ethernet IP Address and enter the IP address for the
Netopia Router’s Ethernet port.
■ Select Ethernet Subnet Mask and enter the subnet mask for
the Ethernet IP Address that you entered in the last step.
■ Select Default IP Gateway and enter the IP address for a
default gateway. This can be the address of any major router
accessible to the Netopia Router.
A default gateway should be able to successfully route packets
when the Netopia Router cannot recognize the intended
recipient’s IP address. A typical example of a default gateway is
the ISP’s router.
■ Select DNS Server and enter the IP address for a domain name
server. The domain name server matches the alphabetic
addresses favored by people (for example, robin.hood.com) to
the IP addresses actually used by IP routers (for example,
163.7.8.202).
