PCAN-PC/104 – User Manual
13
decoupled versions of the card contain an interconnected DC/DC
converter. Therefore the current output is limited to about 50 mA.
Attention! At this procedure special care is indispensable, since
there is a short circuit danger. The PCAN-PC/104 card could be
destroyed and/or the power supply or electronics of the
computer or other components connected could be damaged.
Attention! Risk of short circuit! If the option described in this
section is activated, you may only connect or disconnect CAN
cables or peripheral systems (e.g. external transceivers or
optocouplers) to or from the PCAN-PC/104 card while the
computer is de-energized.
Important note: PEAK-System Technik GmbH does not give
guarantee on damages which have resulted from application of
the option described in this section.
Set the solder bridges on the PCAN-PC/104 card according to the
desired settings. Figure 6 shows the positions on the card; the table
below con
tains the possible settings.
