A SERVICE OF

logo

PCAN-PC/104 – User Manual
9
Jumper field JP3/JP4
A B C D E
I/O address range
X X X X 360h 37Fh
X X X 380h 39Fh
X X X X X 3E0h 3FFh
2.2 Installation into the Computer
Do the following to install the PCAN-PC/104 card into the
computer:
1. Make sure that the computer is turned off (power switch at
the computer's supply unit).
2. Plug the PCAN-PC/104 card onto a PC/104 connector. For
details please refer to the documentation of the computer.
3. Interconnect the connector for each CAN channel on the
PCAN-PC/104 card (see Figure 3) with the CAN connector of
the slo
t bracket using the attached flat cable.