PCAN-PC/104 – User Manual
25
Appendix C Quick Reference
Default setting at delivery
CAN Channel IRQ I/O Address Range Remark
1 10 300h – 31Fh
2 5 320h – 33Fh Only at the Dual Channel version
Hardware Installation / Configuring the Computer
Plug the PCAN-PC/104 card onto the PC/104 stack of the switched off
computer. After switching on the computer enter the BIOS setup. In
the PnP table mark the interrupts used by the PCAN-PC/104 card as
reserved.
Software setup and startup under Windows
Execute the driver installation program from the supplied CD-ROM.
Run the CAN monitor PCAN-View from the Windows Start menu as
a sample application for accessing the PCAN-PC/104 card. Indicate
the needed parameters for initialization of the card (I/O base
address, interrupt) and select the desired CAN channel, when using
the Dual Channel version.
HS-CAN connector (D-Sub, 9 pins)
