Pfaff 1520 Manual

A SERVICE OF

next previous

48

24. Basic position of setting eccentric for the sideways needle position on Pfaff 1540

Requirement:

In its basic position the setting eccentric must point upwards at a position approx. 45 degrees towards the

left (fig. 47).

Adjustment:

z Set stitch width adjustment dial 70 to "0" (fig. 47).

z Set needle position adjustment wheel 79 to "center".

z Press straight stitch and zigzag stitch button.

z Loosen screw 73 (fig. 49).

z Rotate setting eccentric 74 upwards and 45 degrees to the left.

z Rotate setting eccentric 16 to the left and to the right, until the needle is centered in the needle

slot (fig. 48).

z Tighten screw 73.