Pfaff 1520 Manual

A SERVICE OF

next previous

72

39. Adjustment of equal stitch length for left and right buttonhole seams

Requirement:

The stitch lengths of the left buttonhole seam and of the right buttonhole seam must be the same (fig. 78).

Note:

When the correct zero point has been set on the stitch length regulator, the stitch lengths of the buttonho-

le seams are normally the same (section 11 of this manual).

Check:

z Sew a buttonhole with gimp thread and compare the two stitch lengths.

Adjustment:

z If right buttonhole seam has longer stitch length than left one (fig. 79), turn setting eccentric slightly to

the front in direction "A" (fig. 81).

z If left buttonhole seam has longer stitch length than right one (fig. 80), turn setting eccentric slightly to

the rear in direction "B" (fig. 81).

Cross-check:

z Sew a buttonhole with gimp thread and check the stitch length.