38 www.pridemobility.com Jet 3 Ultra
Figure 27. Battery Wiring Diagram
VIII. CARE AND MAINTENANCE
BATTERY CONNECTOR
Figure 26. Jet 3 Ultra Battery Connections
WARNING! Prevent injury. Use only the
quick disconnect harness supplied with
your power chair. It has a thermal fuse
on each lead.
17. Place a new battery in the front of the battery tray. Make
sure that the terminals are facing toward the rear of the power
base.
WARNING! Prevent injury. Make sure you
tighten the fasteners so that the
connections are secure.
18. Fasten the reusable strap around the front battery.
19. Connect the wiring harnesses to the front battery. See
figures 26 and 27.
20. Slide the battery tray back into the power base.
NOTE: Make sure that the power pod is out of the
way when reinstalling the batteries.
JOYSTICK MODULE
CONNECTOR
QUICK DISCONNECT
