175
Using the Command Line Interface (CLI)
NOTE
The Wireless Distribution System (WDS) feature is not available for 802.11a or 802.11b/g APs at this time.
Security Parameters
MAC Access Control Parameter
MAC Access Control Table
RADIUS Parameters
General RADIUS Parameters
RADIUS Server Configuration Parameters
NOTE
Use a server name only if you have enabled the DNS Client functionality. See DNS Client for RADIUS Name
Resolution.
Name Type Values Access CLI Parameter
MAC Address Control Group N/A R macacl
Status Integer enable
disable (default)
RW macaclstatus
Operation Type Integer passthru (default)
block
RW macacloptype
Name Type Values Access CLI Parameter
MAC Address Control
Table
Table N/A R macacltbl
Table Index N/A N/A R index
MAC Address PhysAddress User Defined RW macaddr
Comment (optional) DisplayString User Defined
max 254 characters
RW cmt
Status (optional) Integer enable (default)
disable
delete
RW status
Name Type Values Access CLI Parameter
RADIUS Group N/A R radius
Client Invalid Server
Address
Counter32 N/A R radcliinvsvradd
Name Type Values Access CLI Parameter
RADIUS Authentication Table N/A R radiustbl
Table Index (Profile
Index)
Integer N/A R index
Primary/Secondary
Index
Integer Primary (1)
Secondary (2)
R subindex
Status Integer Enable
Disable
RW status
Server Address Format Integer Ipaddr
Name
RW seraddrfmt
