A SERVICE OF

logo

LOADING MULTI-PART FORMS
Youcanprintoncontinuousmulti-partformswiththebuilt-intractorunit.
Youcanusemulti-partformsthathaveuptofourpartsincludingtheoriginal
when the Multi-partmode is selectedwith the EDS setting.(For details,
pleasereferto Chapter3.)
It isrecommendedtouseformsjointedbydottedorpastingunderthenormal
officecondition.
Multi-part forms should be pressure sensitive, and should not be used in the
friction feed. (Bottom feed with the pull-tractor is recommended.)
NOTE:
Whenprintingcontinuousmulti-partforms,careshouldbetaken,
as the edgesof thepapermightbe damaged.
The tolerance between the dotted or pasted position and other
positionsmustbe lessthan0.05mm.
18