Getting Set Up
2
User Manual
2-21
1.
PhaserShare card (optional)
The printer accepts one of the following:
■ PhaserShare Ethernet card supporting Novell NetWare, EtherTalk,
TCP/IP, Telnet and FTP protocols.
■ PhaserShare Token Ring card supporting Novell NetWare, TCP/IP,
TokenTalk, Telnet and FTP protocols.
■ PhaserShare LocalTalk/serial card.
The PhaserShare Network Cards and Software System Administrator
Manual contains all the information necessary for configuring and
using the optional network interfaces. Refer to “PhaserShare
network cards” on page 8-8 for ordering information.
2.
Parallel (standard)
If needed, the parallel port can be configured for bi-directional
communications. Refer to the on-line manual on the printer’s
CD-ROM for instructions on using utility files to control the
parallel port. The CD-ROM also covers other topics such as
disabling timeouts, bi-directional status reporting and the parallel
port pinout.
3.
SCSI (standard)
The SCSI port is used only for connecting an external hard disk or
for connecting the Phaser Copystation. Refer to “SCSI peripheral
devices” on page 2-24 for more information on the SCSI port.
Refer to “Phaser Copystation” on page 8-9 for more information
on the Phaser Copystation.
Note
Make all printer connections before you turn on the printer.
