134 GL-1010 Administrator’s Guide
PEER TO PEER PRINTING
Considerations and Limitations
n You cannot assign the GL-1010 to a Microsoft Domain; it can
participate only in a Microsoft Workgroup.
n The GL-1010 device name must be unique within the
network. The device name is also required in order to update
the controller software using TopAccess.
Prerequisites
n Determine a unique device name (also known as the host
name or Microsoft Computer name) for the GL-1010. By
default, the device name is
GL<MAC Address>, where
<MAC Address> is the media access control (MAC) number
of the NIC installed in the GL-1010. You can change the
device name, providing it is unique within the network.
n Pick a workgroup name for the device or accept the default
name,
WORKGROUP.
Microsoft Peer to Peer Setup
1 Launch your Web browser and enter the IP address of the
GL-1010 you want to configure to access the embedded Web
site, TopAccess. (Refer to
Opening TopAccess on page 64.)
If you do not know the IP address, you can find it by using
GL DocMon (see the GL-1010 Operator’s Guide (Basic) for
details).
2 Click the Login link and enter the administrative username
and password.
3 Click the Administration tab.
4 Click the Setup submenu.
