www.vtechphones.com
26
Answering system operation
Audible indicators
Your telephone system gives you voice prompts for feature operations and voice conrmations when
you press a button or complete an operation.
Setting the clock
1. Make sure the answering system is on.
2. Press CLOCK. The system announces the clock setting (e.g. day, time and year), then announces:
“To set the clock, press CLOCK.”
3. Press CLOCK. The system announces the current day.
4. Press SKIP or REPEAT until the system announces the correct day, then press CLOCK. The
system announces the current hour.
5. Press SKIP or REPEAT until the system announces the correct hour, then press CLOCK. The
system announces the current minute.
6. Press SKIP or REPEAT until the system announces the correct minute, then press CLOCK. The
system announces the current year.
7. Press SKIP or REPEAT until the system announces the correct year, press CLOCK. The system
announces the current clock setting and exits the clock menu.
About announcements
• If you choose not to record an announcement, the system answers with the pre-recorded
announcement “Hello. Please leave a message after the tone.” You may use this announcement, or
record one of your own.
• If you have caller ID
service the clock will
be set automatically
with incoming calls.
You can also set
the clock manually.
Be sure to correctly
program the year.
• To increase or
decrease the
remote access code
by increments of 10,
press and hold the
SKIP or REPEAT
key.
• Press and hold
CLOCK about two
seconds to exit
clock setting at any
stage and the new
setting will be saved
and announced.
