3-1
Tab Down Tab Up Enter Back Read On/Off
3. Setting Instrument Configuration
The Configuration mode consists of a several settings that can be edited to customize
your instrument for your particular application.
1. Use Tab Down or Tab Up to highlight Config.
–MAIN MENU–
Store
Normal
References
Calibrate
Config.
MA48
——————
XXXX
******
2. Press Enter to access the Configuration mode.
CONFIGURATION
Display Options
Measure Options
Set Clock
Communications
Language
Display Options
The Display Options allows you to configure the following settings:
Active ∆E – Allows you to choose the Delta E method that is available in Store and
Normal modes. Available settings are: ∆E
*
a
*
b
*
, ∆Ecmc, ∆Ec6175, ∆Ep6175 and ∆Ee6175.
Active Illum/Obs – Allows you to select the illuminant/observer combinations available
in Store and Normal mode. An arrow (>) indicates the illum/obs combination is active.
Active Angles – Allows you to select which three angles are displayed on the screen in
Store mode and Reference mode. Available setting are: “15°/45°/75°”, “25°/45°/75°”,
“25°/45°/110°”, and “15°/45°/110°.”*
15°/45°/110° viewing geometry by license from E.I. DuPont de Nemours and Co., Inc. U.S. Patent No. 4,479,718.
Editing Display Options
1. Press Tab Up or Tab Down to move the highlight to Display Options.
CONFIGURATION
Display Options
Measure Options
Set Clock
Communications
Language
2. Press Enter to access the Display Options menu.
Display Options
Active ∆E
Active Illum/Obs
Active Angles
Active ∆E
1. Press Tab Up or Tab Down to move the highlight to Active ∆E and press Enter to
open the Active ∆E editor.
2. Press Tab Up or Tab Down to move the highlight to desired ∆E and press Enter to
select setting and exit editor.
