3M #3960 Stud Sensor User Manual


 
3M™ Rapid Detection Reader Maintenance
37
If the 3M Rapid Detection Reader requires repair or replacement, it must be disinfected prior to
repackaging and shipping.
Upgrading Device Software
In the event there are enhancements made to the 3M Rapid Detection Reader software,
upgrades will be available through a USB Flash Drive. Attach the drive containing the latest
software to the CM and follow the instructions provided with the USB and those below.
1. From the main Settings menu (Figure 20), touch Upgrade.
The Settings: Upgrade screen will open (Figure 49).
2. Touch the appropriate selection:
Upgrade All Software: upgrades CM software only.
Upgrade Port Software: upgrades the TM only
Upgrade Languages Only: upgrades language software
Cancel: returns to the Settings menu without upgrade
3. Touch Confirm to confirm software upgrades (Figure 50) or
Cancel to return to Settings menu.
4. When prompted, turn 3M Rapid Detection Reader off and on
again to complete the upgrade.
Figure 49. Settings: Upgrade
Figure 50. Settings: Upgrade
Confirmation
Disposal of Equipment
Do not dispose of this product in municipal waste. Please contact your local 3M subsidiary to
arrange disposal and recycling.