3M #3960 Stud Sensor User Manual


 
3M™ Rapid Detection Reader Specifications
48
CM Specifications
Supported USB Devices Label printer: Zebra
®
TLP 2824
Generic USB flash drive
Barcode scanner: Symbol Technologies LS9208.
Display 640 x 480 pixels, 5.7~6.5 diag (14.48~16.51 cm diag).
TM / CM Specifications
Operating temperature
15 - 30º C (59 - 86º F)
Storage temperature
-10 - 50º C (14 - 122º F)
Operating Humidity
20 90% relative humidity, non-condensing.
Operating/Storage
Elevation
0 2000m
Complies with:
United States: Title 47 CFR Part 15; Canada: Title 47 CFR Part 15
or IEC 61326; European Union: IEC 61326; Australia: IEC 61326;
Japan: IEC 61326; China: IEC 61326.
Complies with the
following IEC Standards:
UL/IEC 61010-1 - Safety requirements for electrical equipment for
measurement, control, and laboratory use.
UL/IEC 61010-2-010 - Particular requirements for laboratory
equipment for the heating of materials.
UL/IEC 61010-2-081 - Particular requirements for automatic and
semiautomatic laboratory equipment for analysis and other purposes.
UL/IEC 61010-2-101 - Particular requirements for in vitro diagnostic
laboratory (IVD) equipment.
UL/IEC 60529 - Degrees of protection provided by enclosures.
UL/IEC 60825-1 - Safety of laser products - Part 1: Equipment
classification, requirements, and user guide.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.