Filter
Top Products
6
Getting Started
The 3M™ Handheld RFID Reader Model 702 and Model 802 (Handheld) are
used to read 3M™ RFID Tags placed in items such as books,
videocassettes, files, etc.
The main difference between the Model 702 and Model 802 hardware is the
type of RFID tag that they can read. In addition, they may run different
software that performs different tasks.
The Model 702 can only be used with systems that use 3M™ D1 RFID Tags.
(The Model 702 cannot read D8 tags.)
The Model 802 can only be used with the 3M™ One-Tag RFID System
that uses 3M™ D8 RFID Tags. (The Model 802 cannot read D1 tags.)
IMPORTANT NOTE!
Save all the original handheld packing materials.
You will need the packing materials if you return the
Handheld for repair.
Specifications
Operating Temperature
Typical ambient temperature range: 50°F to 104°F (10°C to 40°C)
Storage Temperature
-40°F to 131°F (-40°C to 55°C)
Humidity
0% to 85% RAH, non-condensing
Memory Card
Type I or Type II CompactFlash
TM
card
(A 64-MB memory card stores data for approximately 460,000 items.)
Battery type
Only use a Molicel MCR-1821 battery.
Battery charger
Only use a Molicel MAC-1821B battery charger.
Typical charge life
A fully charged battery will last for approximately three to four hours of
"trigger time" (time the trigger is pressed or activated). This typically
provides many hours (even a full day or two) of use before recharging is
required.
Typical time to fully charge
a battery
The battery charger will charge a fully discharged battery in approximately
four hours.
Battery Charger Power
100-240 Vac, 1.0A, 50-60 Hz