Filter
Top Products
64
♦ DETECT MODE
Four alarm detect modes are provided for different application.
INT. FOCUS
The alarm will be triggered if the internal focus changes; and if the focus
returns to the original position, the alarm will stop.
FIX FOCUS
If focus movement is detected, the alarm will be triggered, and the alarm
stops when focus returns to the original position. Of the detected focus
movement keeps changing for more than four seconds, the new focus
position will be memorized as the reference and the alarm will stop.
INT. AE
When Auto Exposure (AE) movement is detected, the alarm will be triggered;
and if the Exposure Level returns to the original level, the alarm will stop.
FIX. AE
The alarm will be triggered if the Exposure value changes; if the adjusted AE
value retains for four seconds, the value will be saved as the reference and
the alarm will stops.
♦ EXIT
Exit this page.
B-3-19 WDR SETTING (23x MODEL Only)
The Wide Dynamic Range function is especially effective in solving indoor and
outdoor contrast issues to enhance better image quality and video performance. It
enables the speed dome to catch detailed data from the dark part (Indoor) without
any saturation from the bright part (Outdoor). The parameter of WDR function
can be set on this page.
NOTE: The INT. FOCUS and FIX FOCUS detect modes will
be activated only with Auto Focus mode.
NOTE: The Backlight function will automatically turned off
when the WDR function is enabled, because the WDR
function has better effect than the Backlight compensation.