Filter
Top Products
68
H CENTER(000 ~ 256)
The original center of mask zone is the center of screen. User can move the
center of mask zone to another position through adjust this value.
V CENTER(000 ~ 256)
The original center of mask zone is the center of screen. User can move the
center of mask zone to another position through adjust this value.
H SIZE(000 ~ 127)
User can adjust the horizontal size of privacy mask through this item. Set the
H and V size to 0 can also delete the selected mask.
V SIZE(000 ~ 127)
User can adjust the vertical size of privacy mask through this item. Set the H
and V size to 0 can also delete the selected mask.
♦ MASK CLEAR+RESET
The item is used to clear the mask settings of the selected privacy mask.
Select a mask and press <ENTER> to erase its configuration.
♦ MASK DISPLAY
This item is used to set the occasion to display privacy mask.
FIRST
If select this mode, the camera will detect the mask zone of the next preset
position and display the mask in advance, then pan the speed dome to the
preset point.
LAST
If select this mode, the camera will move the speed dome to the preset point,
then display the mask zone.
♦ EXIT
Exit this page.
NOTE: For 23x MODEL, the available area for setting
privacy mask is restricted within tilt angle 45°, and two mask
zones are allowed to set in a view area.