Filter
Top Products
Page 4 AMERICAN SANDERS TECHNOLOGY Apollo 8 Operator's Manual
DANGER: Electrocution could occur if maintenance and repairs are performed on a unit that is not
disconnected from the power supply. Disconnect the power supply before attempting any
maintenance or service.
DANGER: Electrocution could occur if machine is used on ungrounded electrical circuit. Never remove
or disable the grounding supply conductor on the electrical cord. Consult an electrician if the
grounding conductor is missing or if you suspect your circuit is not grounded properly.
DANGER: Use of this machine with a damaged power cord could result in an electrical shock. Do not
use the machine if the power cord is damaged. Do not use the electrical cord to move the
machine.
DANGER: Electrocution or injury could occur if the power cord is run over or damaged by the sander.
Keep the cord free from under the machine to avoid contact with the sandpaper. Always lift
the power cord over the machine.
DANGER: Moving parts of this machine can cause serious injury and/or damage. Keep hands, feet and
loose clothing away from all moving parts of the sander.
DANGER: Operating a sander without all guards, doors or covers in place can cause an injury or damage.
Always check to make sure that all of the guards, doors and covers are secure and in place.
DANGER: Injury to the operator or bystanders could occur if the machine's power is on while performing
maintenance, changing or adjusting the belt, or changing the dust bag.
DANGER: Attempting to adjust the belt tracking while the machine is on can cause injury and/or damage.
Do not perform belt tracking adjustments while sanding equipment is running.
WARNING: Fire could occur if the machine is used on a power circuit that repeatedly trips or is undersized.
Have a licensed electrician check the fuse, circuit breaker or power supply.
WARNING: Failure to read and observe all safety statements found on your machine or in this Owner's
Manual can result in serious injury or damage. Read and observe all safety statements. Make
sure that all labels, decals, warnings, cautions, and instructions are fastened to the machine.
Get new labels from your authorized American Sanders Technology distributor.
WARNING: In the event of a bag fire, injury can occur to the operator if the operator is tied or strapped to
equipment. Use operating belt properly ( follow procedure on page 8).
WARNING: Injury to the operator or bystander can occur if protective gear is not worn while sanding.
Always use eye, ear, and respiratory protection while performing any sanding operation.
WARNING: Bodily injury could occur if power is applied to the machine with the power switch already in
the "ON" position. Always check to assure that the power switch is in the "OFF" position
before connecting power supply.
CAUTION: Maintenance and repairs performed by unauthorized personnel could result in damage or
injury. Maintenance and repairs performed by unauthorized personnel will void your warranty.
Servicing of this unit must always be referred to an authorized American Sanders Technology
distributor.
CAUTION: Use of this machine to move other objects or to climb on could result in injury or damage. Do
not use this machine as a step or furniture. Do not ride on this machine.
CAUTION: Damage could occur to the machine if not properly kept in a dry building for storage. Store
the machine in a dry building.
CAUTION: The machine is heavy. When transporting the machine, remove the motor. Get help to lift
the machine and motor.
CAUTION: Serious damage to the floor can occur if the machine is left running in one spot while the
sanding drum is in contact with the floor. To avoid damage to the floor, feather cut in at a normal
sanding rate. Do not dwell while lowering or raising the contact wheel. Always sand at a
constant rate.