Filter
Top Products
M-GAGE
®
S18M — Vehicle Detection Sensor
2 P/N 114430 rev. A
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
P/N 114430 rev. A 3
M-GAGE
®
S18M — Vehicle Detection Sensor
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Car Wash Entry/Exit
The Banner M-GAGE vehicle detection sensor will reliably
detect vehicles in and around car wash bays. It will
reliably detect the presence or absence of a vehicle to
provide collision avoidance at the exit of a conveyorized
tunnel, provide an entry or exit-door trigger, or trigger an
undercarriage wash.
Overhead Door
The Banner M-GAGE sensor can be used to trigger the
opening and closing of high-traffic internal overhead doors.
Mounted in the floor, it will reliably detect forklifts or trucks
as they approach the doors. Banner’s applications engineers
are available to help determine proper sensor placement for
specific door-trigger applications.
Drive-Up Kiosk
The Banner M-GAGE sensor reliably detects vehicles at
drive-through systems or other drive-up kiosks. It will
reliably detect a vehicle to trigger personnel that a vehicle
is present, and to initiate a timing system.
Loading Dock
The Banner M-GAGE sensor provides multiple advantages
for loading docks. It will reliably detect the presence of
a vehicle as it backs into a dock, triggering a light on the
interior of the building to notify the dock attendant that a
vehicle is in position for loading/unloading. The M-GAGE
can also be used to trigger dock/ramp leveling systems.
Approved Applications
The M-GAGE sensor provides a direct replacement for inductive loop systems, and needs no external frequency controller box.
Unique mounting solutions allow an M-GAGE sensor to be replaced easily without disrupting or re-cutting the pavement.