Filter
Top Products
66 MatrixPRO • 8x8 DVI Router • User’s Guide
5. GUI Installation and Operation
Using the Video Switching Tab
mÉêÑçêãáåÖ=~=q~âÉ
On the Video Switching Tab, use the following steps to perform a take:
1. In the Outputs Section, click the output to which you want to route an input. The
output button turns yellow.
2. In the Inputs Section, click the desired input source. The selected input button
turns yellow, and its number appears in a bright red box in the Video column —
adjacent to the selected output.
3. In the Inputs Section, click TAKE. The selected input number appears in a bright
green box in the Video column — indicating an active route.
4. Repeat from step 1 to perform another take.
Please note the following important points:
• To cancel a route before pressing TAKE, click the Cancel button in the Inputs
Section, or click the selected input button to “de-select” it. The previous route
remains in effect.
• A “pending” route remains pending — even if you click a different output — until
TAKE or Cancel is pressed. The bright red square always indicates a pending
route.
mÉêÑçêãáåÖ=~=jìäíáJq~âÉ
This procedure enables you to perform multiple input-to-output routes with one “take.”
On the Video Switching Tab, use the following steps to perform a multi-take:
1. In the Outputs Section, click the output to which you want to route an input. The
output button turns yellow.
2. In the Inputs Section, click the desired input source. The selected input button
turns yellow, and its number appears in a bright red box in the Video column —
adjacent to the selected output.
3. Repeat steps 1 and 2 for as many input-to-output routes as desired.
4. In the Inputs Section, click TAKE. The selected input numbers appear in bright
green boxes in the Video column — indicating active routes.
5. Repeat from step 1 to perform another multi-take.
Note
If an input is already associated with that output, the input
number will appear within a bright green box in the Video
column. If there is no input associated with the output, the
output is “blanked” and the label “--” is shown.
Note
When the route is completed, the Status Menu (if visible) and
the appropriate input/output buttons on the physical
MatrixPRO panel update accordingly.