Black & Decker MS2000 Cordless Sander User Manual


  Open as PDF
of 36
 
6
Introduction
The MS2000 is a complete sanding kit that allows you to choose between 4 different
sanding configurations to do a variety of tasks. Combining the versatility with the Smart
Select
TM
feature, the sander gives you optimal results.
Assembly
Warning: Before assembly, make sure that the tool is switched off and
unplugged.
Removing sanding bases - Figure B
•Toremovethesandingbase,pressthe
release button (3) and pull the base (6) off
the tool.
Random orbit sanding base
With this sanding base, you can use the tool as a random orbit sander.
Attaching the random orbit sanding base - Figure C
•Holdthetoolandthesandingbase(4)
facing upwards as shown in figure C.
•Alignthedustopenings(9)inthesanding
base with the dust openings (10) in the tool
base.
•Pressinonthesandingbaseuntilyouhear
it click into place.
Fitting sanding sheets - Figure D
•Holdthetoolwiththesandingbase(4)
facing upwards.
•Placethesandingsheet(11)ontothe
sanding base (4) making sure the holes in
the sheet line up with the holes in the base.
B
6
3
4
9
9
10
c
4
11
d
 previous next