Black & Decker MS2000 Cordless Sander User Manual


 
9
Automatic brake system (ABS)
This tool has an automatic brake system. When the tool is not on the work surface, this
feature keeps the speed of the disc below the speed of the motor. When the tool is
switched off, the disc will stop very quickly.
Dust Collection
WARNING: Collected sanding dust from sanding surface coatings (polyurethane,
linseed oil, etc.) can self-ignite in sander dust canister or elsewhere and cause fire. To
reduce risk, empty canister frequently and strictly follow sander manual and coating
manufacturer’s instructions.
CAUTION: When working on metal surfaces, do not use the dust canister or a vacuum
cleaner because sparks are generated. Wear safety glasses and a dust mask. Due to the
danger of fire, do not use your sander to sand magnesium surfaces. Do not use for wet
sanding.
Dust canister - Figure L
Attaching and removing:
•Fitthedustcanisteroverthedustextraction
outlet. To remove the canister, pull it out to the
rear and off the outlet.
Emptying:
•Removecanisterandshakeoutdebrisovera
trash can.
SMART SELECT TECHNOLOGY CHART
Setting Application Recommended Base Base Color Speed Setting
Sanding tight and
hard to reach areas.
Light, detail sanding.
Detail finger
attachment
(1) Low
Orange
Large
detail base
- tip facing
forward
Sanding areas with
corners.
Paint / Stain removal.
Surface preperation for
painting.
(1) Low
Blue
Flush
sanding
base - 90º
edge facing
forward
Flush sanding - up to
the edge.
Sanding doors and
window frames.
Paint / Stain removal.
(2) High
Blue
Random
orbit base
Sanding large areas.
Remove the most
amount of material
quickly.
Paint / Stain removal.
Surface preperation
for painting.
(2) High
Green
l