Filter
Top Products
1;+766-+<<0-84=/.:75<0-87?-:
;7=:+-*-.7:-5)316/)6A),2=;<5-6<;
7:+0)6/16/)++-;;7:1-; Such preventive safety
measures reduce the risk of starting the tool accidentally.
$14-4),-6;<)44)<176
$7:-,=+-<0-:1;37.162=:A,767<=;-
<14-*4),-4):/-:7:;5)44-:<0)6I
,1)5<-:,767<=;-<14-*4),-?1<0;8--,:)<16/4-;;
<0)6" 64A=;-;577<0-,/-<14-*4),-.:--7.
78-616/;)6,/:77>-;
1.Remove the lower guard by using a number 2 screwdriver
(not provided) to loosen the two securing screws (Fig. 1).
2.Use the nut wrench (included) to hold the tile blade nut
and use the motor shaft wrench (included) to hold the
motor shaft, then loosen the nut with nut wrench in a
counterclockwise direction (Fig. 2).
3.Remove outer flange and the tile blade.
4.Ensure that the shaft and the flanges are clean.
5.Ensure that the directional arrow marked on the new tile
blade is counterclockwise with the shaft. (Fig. 3). Ensure
the outer flange is aligned with the shaft.
6.Install the new tile blade by reversing the steps required
to remove the tile blade.
7.Ensure the tile blade is securing before using.
WARNING
!
WARNING
!
FIG. 1
FIG. 2
FIG. 3
;;-5*4A)6,,2=;<5-6<;
7?-:
=):,
#+:-?
#+:-?
"-57>-
6;<)44
=<-:
4)6/-
$14-
4),-
=<
#0).<
$14-4),-1:-+<176
#0).<
':-6+0
=<
':-6+0
SM_2610008271_12-09:tile saw 12/17/09 3:25 PM Page 11