Campbell Hausfeld DG490500CK Grinder User Manual


 
Descripción
Las rectificadoras de banco son útiles
para afilar herramientas
(taladros, tijeras, formones, etc.),
alisar herramientas (quitar rebabas de
los bordes de la herramienta), y quitar
material según se necesite.
Los dos tipos distintos de rueda
permiten que la rectificadora cubra
varias necesidades. Normalmente,
utilice la rueda abrasiva gruesa para
el corte general – para quitar una
mayor cantidad de material. Utilice la
rueda media para dar la terminación
y obtener una superficie más suave.
Para desempacar
Cuando desempaque este producto,
inspecciónelo cuidadosamente para
detectar cualquier daño que pueda
haber ocurrido durante el envío.
Informaciones
Generales de
Seguridad
Este manual contiene información
que es muy importante que sepa
y comprenda. Esta información
se lasuministramos como medida
de SEGURIDAD y para EVITAR
PROBLEMAS CON EL EQUIPO.
Debe reconocer los siguientes símbolos.
Ésto le
indica
que hay una situación inmediata que LE
OCASIONARIA la muerte o heridas de
gravedad.
Ésto le
indica
que hay una situación que PODRIA
ocasionarle la muerte o heridas de
gravedad.
Ésto le
indica
que hay una situación que PODRIA
ocasionarle heridas no muy graves.
Ésto le
indica
una información importante, que de no
seguirla, le podría ocasionar daños al
equipo.
PROPOSICIÓN DE CALIFORNIA 65
Cuando corta, lija, taladra
opule materiales como por
ejemplo madera, pintura,
metal, hormigón, cemento, u
otro tipo de mampostería se puede
producir polvo. Con frecuencia este
polvo contiene productos químicos que
se conocen como causantes de cáncer,
defectos congénitos u otros daños
reproductivos. Use equipo de protección.
Este
producto,
o su cordón eléctrico, contiene
productos químicos conocidos por el
estado de California como causantes de
cáncer y defectos de nacimiento u otros
daños reproductivos. Lave sus manos
minuciosamente después de usar.
Las siguientes precauciones de
seguridad se deben seguir en todo
momento junto con cualquier otra
norma de seguridad.
1. Lea con atención todos
los manuales que se
incluyen con este
producto. Familiarícese
bien con los controles y el
uso adecuado del equipo.
2. Sólo se les debe permitir usar la
herramienta a aquellas personas
bien familiarizadas con estas reglas
de manejo seguro.
25 Sp
Manual de Instrucciones DG490500CK, DG490700CKS
Sírvase leer y guardar estas instrucciones. Lea con cuidado antes de tratar de armar, instalar, manejar o darle servicio al
producto descrito en este manual. Protéjase Ud. y a los demás observando todas las reglas de seguridad. El no seguir las
instrucciones podría resultar en heridas y/o daños a su propiedad. Guarde este manual como referencia.
IN713801AV 6/07
BUILT TO LAST
© 2007 Campbell Hausfeld/Scott Fetzer
Ver la Garantía en página 32 para información importante sobre el uso comercial de este producto.
DG490500CK
DG490700CK
Rectificadora de banco
con lámpara
MANUAL
Especificaciones
DG490500CK
Voltaje 120V 60Hz
Clasificación actual 2,8 A
Tamaño del mandril 15,8 mm (5/8")
R.P.M. 3550
Tamaños de rueda 8" x 3/4" x 5/8"
(20 x 2 x 1,6 cm)
Peso 30 lbs (13,6 kg)
Especificaciones
DG490700CK
Voltaje 120V 60Hz
Clasificación actual 2,5 A
Tamaño del mandril 12,7 mm (1/2")
R.P.M. 3450
Tamaños de rueda 6" x 3/4" x 1/2"
(15 x 2 x 1,3 cm)
Peso 22,5 lbs (10,2 kg)
RECORDATORIO: ¡Guarde su comprobante de compra con fecha para fines de la garantía!
Adjúntela a este manual o archívela en lugar seguro.
Operating Instructions
8
www.chpower.com
Limited Warranty
1. DURATION: From the date of purchase by the original purchaser as follows: one year.
2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld / Scott Fetzer Company, 100 Production
Drive, Harrison, Ohio, 45030, Telephone: (800) 424-8936.
3. WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale)
of the Campbell Hausfeld product.
4. WHAT PRODUCTS ARE COVERED BY THIS WARRANTY: Any Campbell Hausfeld power tool supplied or
manufactured by Warrantor.
5. WHAT IS COVERED UNDER THIS WARRANTY: Substantial defects in material and workmanship which occur
within the duration of the warranty period.
6. WHAT IS NOT COVERED UNDER THIS WARRANTY:
A. Implied warranties, including those of merchantability and FITNESS FOR A PARTICULAR PURPOSE ARE
LIMITED FROM THE DATE OF ORIGINAL PURCHASE AS STATED IN THE DURATION. If this product is used
for commercial, industrial or rental purposes ,no warranty applies. Some States do not allow limitation
on how long an implied warranty lasts, so the above limitations may not apply to you.
B. ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT
FROM ANY DEFECT, FAILURE, OR MALFUNCTION OF THE CAMPBELL HAUSFELD PRODUCT. Some States
do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation
or exclusion may not apply to you.
C. Any failure that results from an accident, purchaser’s abuse, neglect or failure to operate products in
accordance with instructions provided in the owner’s manual(s) supplied with product. Accident,
purchaser’s abuse, neglect or failure to operate products in accordance with instructions shall also
include the removal or alteration of any safety devices. If such safety devices are removed or altered,
this warranty is void.
D. Normal adjustments which are explained in the owner’s manual(s) provided with the product.
7. RESPONSIBILITIES OF WARRANTOR UNDER THIS WARRANTY: Repair or replace, at Warrantor’s option,
products or components which are defective, have malfunctioned and/or failed to conform within duration
of the warranty period.
8. RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY:
A. Provide dated proof of purchase and maintenance records.
B. Call Campbell Hausfeld (800-424-8936) to obtain your warranty service options. Freight costs must be
borne by the purchaser.
C. Use reasonable care in the operation and maintenance of the products as described in the owner’s
manual(s).
This Limited Warranty applies in the United States, Canada and Mexico only and gives you specific legal rights.
You may also have other rights which vary from state to state or country to country.