Filter
Top Products
4.
Photography
Operation
of
the retinal camera in the system using this adapter is basically the same as in the general
retinal photography.
Please also refer to the manuals
of
the CR6-45NM1CR6-45NMf and the digital camera.
NOTE: FCD (Flash Compensation
by
Diopter) does
not
operate in the photography using this adapter.
Also, fluorescent photographycannotbe performed with the CR6-45NMf.
Step 1 Turn ON the power
(I)
Be sure to turn
ON
the power in the order
of
digital camera and then the retinal camera.
Step 2 Adjust the flash intensity of retinal camera.
(1) When the adapter is attached,
"DA"
is displayed on the lower right side
of
the retinal camera
monitor. Press the switch under it.
C 123456
<01-06-20> R
DA
SET 6
000.
(2) The display changes as shown below.
Adjust the flash intensity as required using the switches under
"-"
and "+" signs.
<FLASH SET>
RTN
+
DA
6
--+--
Flash intensity
0
••
0
-3-