Filter
Top Products
Page 2SKU 3663 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Power Requirements 220 V~, 1-Phase, 60 Hz, 6 A
( Only use on a 20 amp circuit)
Welding Current 280 A
Welding Blade Sizes 1/8” to 1/2”
Maximum Jaw Movement .137”
Note: Grinder not included.
Note: Performance of this tool (if powered by line voltage) may vary depending on variations
in local line voltage. Extension cord usage may also affect tool performance.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, oper-
ating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write
the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry
place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
WARNING: When using tool, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
Keep work area clean1. . Cluttered areas invite injuries.
Observe work area conditions2. . Do not use the Welder in damp or wet locations. Don’t ex-
pose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence
of ammable gases or liquids.
Keep children away3. . Children must never be allowed in the work area. Do not let them handle
machines, tools, or extension cords.
Store idle equipment4. . When not in use, tools must be stored in a dry location to inhibit rust.
Always lock up tools and keep out of reach of children.
Use the right tool for the job5. . Do not attempt to force a small tool or attachment to do the
work of a larger industrial tool. There are certain applications for which this tool was designed.
It will do the job better and more safely at the rate for which it was intended. Do not modify this
tool and do not use this tool for a purpose for which it was not intended.
Dress properly6. . Do not wear loose clothing or jewelry as they can be caught in moving parts.
Protective, electrically non-conductive clothes and non-skid footwear are recommended when
working. Wear restrictive hair covering to contain long hair. Always wear heavy-duty leather
gloves when handling bandsaw blades.
REV 07j