Filter
Top Products
Page 3SKU 3663 For technical questions, please call 1-800-444-3353.
Inhalation Hazard
Welding/Plasma Cutting Produces TOXIC FUMES and GASSES.
Exposure to welding or cutting gasses can increase the risk of
developing certain cancers, such as cancer of the larynx and
lung cancer. Also, some diseases that may be linked to exposure
to welding or plasma cutting gasses or fumes are:
•Early onset of Parkinson’s Disease •Heart Disease
•Damage to the reproductive organs •Ulcers
•Inammationofthesmallintestineorstomach •Kidney damage
•Respiratory diseases such as emphysema, bronchitis or pneumonia
Safety precautions, such as using natural or forced air ventilation and
wearing an ANSI approved respirator, are ESSENTIAL to reduce the
risk of developing the above illnesses.
7. Use eye and ear protection. Always wear ANSI approved impact safety goggles. Wear a full
face shield if you are producing metal lings. Wear an ANSI approved dust mask or respirator
when working around metal and chemical dusts and mists.
Do not overreach8. . Keep proper footing and balance at all times. Do not reach over or across
running machines.
Maintain tools with care9. . Keep tools clean for better and safer performance. Follow instruc-
tions for lubricating and changing accessories. Inspect tool cords periodically and, if damaged,
have them repaired by an authorized technician. The handle must be kept clean, dry, and free
from oil and grease at all times.
Disconnect power10. . Unplug tool when not in use.
Avoid unintentional starting11. . Be sure the buttons are not depressed when not in use and
before plugging in.
Stay alert12. . Watch what you are doing, use common sense. Do not operate any tool when you
are tired.
Check for damaged parts13. . Before using any tool, any part that appears damaged should be
carefully checked to determine that it will operate properly and perform its intended function.
Check for alignment and binding of moving parts; any broken parts or mounting xtures; and
any other condition that may affect proper operation. Any part that is damaged should be prop-
erly repaired or replaced by a qualied technician. Do not use the tool if any button does not
turn On and Off properly.
Guard against electric shock14. . Prevent body contact with grounded surfaces such as pipes,
radiators, ranges, and refrigerator enclosures.
Replacement parts and accessories15. . When servicing, use only identical replacement parts.
Use of any other parts will void the warranty. Only use accessories intended for use with this
tool. Approved accessories are available from Harbor Freight Tools.
Donotoperatetoolisundertheinuenceofalcoholordrugs16. . Read warning labels if tak-
ing prescription medicine to determine if your judgement or reexes are impaired while taking
drugs. If there is any doubt, do not operate the Welder.